Choosing a GNSS antenna comes down to five technical decisions: frequency bands, gain and LNA performance, multipath rejection, form factor, and the interference environment it must survive. A multi-frequency antenna with a clean low-noise amplifier preserves the centimeter-level accuracy your receiver is capable of — while a mismatched or poorly filtered antenna quietly caps the…
Choosing a GNSS receiver for surveying comes down to five technical decisions: accuracy class (RTK, PPK, or PPP), frequency support (dual- vs triple-band), constellation tracking, interference robustness, and field workflow fit. For professional survey work, a multi-frequency, multi-constellation receiver with RTK capability and serious anti-jamming performance delivers reliable centimeter-level results — even near power lines,…
Choosing a GNSS antenna for a UAV comes down to five engineering decisions: frequency bands, radiation pattern, low-noise amplifier (LNA) performance, multipath rejection, and mechanical fit. For RTK drones you need a multi-band active antenna covering L1/L2/L5 with a hemispherical pattern and an LNA that survives the drone’s own RF noise. Get these right and…
Septentrio AIM+ (Advanced Interference Mitigation) protects GNSS receivers by combining hardware and software techniques that detect, characterize, and cancel jamming and spoofing signals before they can corrupt the position solution. AIM+ is built into the receiver’s RF front-end, delivering 40–60 dB of interference suppression — far beyond the ~25 dB typical of consumer receivers like…
A choke ring antenna reduces multipath by surrounding the GNSS antenna element with concentric conductive rings that act as a high-impedance ground plane, attenuating reflected satellite signals arriving from below the horizon. The rings suppress low-elevation multipath by 20–40 dB before it reaches the element — the difference between meter-level code errors and centimeter-level RTK accuracy…
RTK GNSS for Construction Machine Control: Precision Earthmoving Without the Stakes If you are running a heavy civil or site-development operation, you already know the drill: grade stakes every few meters, a survey crew checking cut and fill, and the inevitable rework when the blade goes a couple of centimetres too deep. RTK GNSS for…
Septentrio mosaic-X5 vs mosaic-G5 P3H: What Is the Difference and Which Should You Choose? Septentrio offers two main OEM GNSS module lines: the mosaic-X5 (flagship) and the mosaic-G5 P3H (professional). While both deliver centimeter-level RTK accuracy and AIM+ anti-jamming, they differ in channel count, anti-spoofing capability, and advanced features. This guide breaks down the differences…
RTK vs PPK for Drone Mapping: Which GNSS Correction Method Should You Use? If you fly drones for mapping, surveying, or inspection, you have two options for achieving centimeter-accurate positioning: RTK (Real-Time Kinematic) and PPK (Post-Processed Kinematic). Both use the same underlying principle — differential corrections from a base station — but they apply those…
GNSS Anti-Jamming vs Anti-Spoofing: What Every Engineer Needs to Know If you work with GNSS for drones, autonomous vehicles, or critical infrastructure, you need to understand the difference between anti-jamming and anti-spoofing. These two technologies protect against fundamentally different threats, yet they are often confused. This guide explains the difference, how each technology works, and…
How to Choose a GNSS Antenna: A Complete Technical Guide for Engineers Selecting the right GNSS antenna is one of the most overlooked factors in achieving reliable centimeter-level positioning. You can pair a $5,000 receiver with a $20 antenna and get worse results than a $500 receiver with a $200 antenna — because the antenna…
