Eview Anti-Jamming GNSS Receivers — Powered by Septentrio AIM+
Eview delivers the anti-jamming GNSS receiver built for environments where standard positioning fails. Powered by Septentrio’s mosaic platform with AIM+ interference mitigation — <1 cm RTK accuracy for UAV, construction, agriculture, robotics, and surveying. Trusted by engineers across the US, EU, and 30+ countries worldwide.
Powered by Septentrio Technology | Compatible with Leading Robotics & Autopilot Platforms
Every Eview GNSS receiver is built on Septentrio’s proven mosaic module technology, compatible with the world’s leading open-source robotics and autopilot platforms.
Eview GNSS Receivers, Boards & GNSS Antennas
Every Eview GNSS receiver is a Septentrio-powered anti-jamming receiver with AIM+ built in as standard. Choose from compact OEM boards for system integration, ruggedised field receivers, or integrated smart antennas — all delivering <1 cm RTK accuracy across GPS, Galileo, BeiDou, and GLONASS.
The anti-jamming GNSS receiver built for real-world RF conditions
Standard GNSS receivers drop out near high-voltage powerlines, cellular towers, and industrial machinery. The Eview GNSS receiver is engineered differently — every unit runs Septentrio’s fourth-generation AIM+ engine, suppressing the broadband, swept, and pulsed interference that disables standard u-blox-based units.
Whether you’re integrating a Septentrio-powered GNSS receiver into a UAV autopilot, machine guidance system, agricultural robot, or survey rover — Eview delivers centimetre-level RTK accuracy in the RF environments where positioning failure is not an option.
Anti-jamming GNSS receivers for every demanding industry
From UAV survey to eVTOL, smart mowing robots to structural monitoring — wherever centimetre accuracy, RF resilience, and uptime matter, engineers choose Eview over standard GNSS solutions.
Six reasons engineers specify Eview over standard GNSS receivers
Every Eview anti-jamming receiver is a Septentrio-powered GNSS receiver. Six capabilities that set it apart from standard positioning hardware.
AIM+ Anti-Jamming
Septentrio’s AIM+ engine suppresses broadband, swept, and pulsed interference with up to 40 dB rejection — keeping positioning locked on construction sites, near cell towers, and in industrial yards.
OSNMA Anti-Spoofing
Hardware-level spoofing detection using Galileo OSNMA authentication. Receivers identify and reject counterfeit GNSS signals before they corrupt your position solution.
Sub-2 cm RTK Accuracy
Full RTK positioning at 1–2 cm horizontal accuracy. Supports GPS L1/L2/L5, GLONASS, Galileo, BeiDou, and QZSS — multi-constellation for maximum satellite availability.
IP67 Ruggedised Enclosures
Aluminium shells, IP67 dust and water sealing, and -40°C to +85°C operating range. Designed for UAV payloads, construction machine mounting, marine installations, and structural monitoring.
Multi-Band, Multi-Constellation
Triple-frequency receivers span all civil GNSS bands. Multi-constellation tracking maximises satellite geometry in urban canyons, under forest canopy, and near large structures.
Integration-Ready Interfaces
NMEA 0183, SBF binary, USB, RS-232, CAN bus (J1939/CANopen), and optional 4G LTE. ROS 1/ROS 2 drivers and SDK — straight into your UAV, AGV, robot, or machine guidance platform.
Trusted by professionals worldwide
Integrators and operators who chose Eview when accuracy and RF resilience were non-negotiable.
“Eview’s A9 GNSS Antenna has been running continuously on our survey vessel for 18 months through North Sea conditions. The AIM+ technology handles port interference that would shut down any standard GNSS unit.”
“We switched from Emlid to Eview’s Mosaic Click boards for our UAV mapping fleet. Initialization is twice as fast and we’ve had zero signal dropout events in 600+ hours of flight. The ROS2 driver is plug-and-play.”
“The Eview SparkFun Triband board is now standard in all our robot dog navigation builds. It’s the only sub-$500 GNSS solution with real anti-spoofing protection that holds RTK lock reliably in industrial environments.”
From the Eview GNSS Blog
Technical insights, product updates and application guides for GNSS professionals.
Frequently asked questions
Technical answers for engineers, integrators, and procurement teams evaluating Eview GNSS receivers.
Get the anti-jamming GNSS receiver your application demands
Tell the Eview team about your deployment environment. Whether you need a compact OEM board or a ruggedised Eview GNSS receiver for field use — our engineers will match you to the right Septentrio-powered solution. Global shipping. 2-year warranty. Free firmware updates.
Get a Quote for Eview GNSS Receivers
Need a Septentrio-powered GNSS receiver for your application? Tell us your use case — UAV, robotics, construction, marine, or surveying — and we’ll recommend the right Eview product and pricing. Canada and international orders welcome.