HB62 Rugged GNSS Base Station Receiver — Septentrio mosaic-X5
Rugged GNSS base station for RTK survey, drone bases and reference networks
- Septentrio mosaic-X5, 448 channels, multi-constellation, multi-frequency
- RTK base or rover: 0.6 cm + 0.5 ppm, 7 s initialization
- Built-in web interface and NTRIP for correction streaming
- RTCM v2.x/v3.x (MSM4–7), CMR, NMEA 0183 and SBF
- Ethernet, 2 × RS232 and USB 2.0, 64 GB internal storage
- IP67 housing, 9–36 V DC input, 1.5 W maximum
- AIM+ anti-jamming, −40 °C to +85 °C operation
No forms to fill in — we reply within one business day.
Rugged GNSS base station for RTK, CORS-style reference and monitoring
The Eview HB62 is a rugged GNSS base station and reference receiver built around the Septentrio mosaic-X5. It tracks GPS, GLONASS, Galileo, BeiDou, QZSS and NavIC on multiple frequencies and streams RTK corrections to rovers, drones and machines over Ethernet, NTRIP or a serial radio link. The same unit can also run as a centimetre-level rover. It belongs to our rugged base receivers.
Built for long-term fixed installation
The IP67 housing, wide 9–36 V DC input, 1.5 W maximum power draw and −40 °C to +85 °C operating range suit permanent sites on rooftops, masts and remote cabinets. The antenna input uses a TNC connector with a lightning-protection design, so you can pair the HB62 with a geodetic survey antenna or a choke ring antenna for the lowest multipath at a reference site (how choke ring antennas reduce multipath). See our GNSS antennas.
Corrections over NTRIP, Ethernet or radio
A built-in web interface lets you set the HB62 as BASE or ROVER, enter the reference coordinates and choose the output streams. Over Ethernet it sends RTCM v3.x (MSM4/5/6/7) or RTCM v2.x corrections through NTRIP to a caster or directly to your network; the two RS232 ports drive a UHF radio modem or a local controller. CMR v2.0 and CMR+ are also supported. Read our guide to NTRIP, RTCM and RINEX integration.
Raw data logging for post-processing
The 64 GB internal storage records complete raw measurements in Septentrio SBF, which converts to RINEX v2.x or v3.x for network adjustment, static survey and PPK processing. A logging base is the reference for PPK drone missions (RTK vs PPK for drone mapping). Firmware and manuals are on our firmware downloads page.
AIM+ anti-jamming and GNSS+ technologies
A base station that loses lock stops every rover that depends on it. Septentrio AIM+ detects and suppresses narrowband and wideband interference (anti-jamming GNSS receivers). APME+ reduces multipath from nearby walls and roofs, IONO+ protects RTK during ionospheric activity, LOCK+ keeps stable tracking and RAIM+ monitors position integrity.
Applications
- Surveying and GIS: local RTK base or static reference receiver for survey crews.
- Drone RTK base: field base for RTK drones and logging reference for PPK mapping.
- Deformation monitoring: fixed reference for landslide, dam, bridge and structural monitoring networks.
- Construction and mining: site base station for machine control and haul-road guidance.
- Precision agriculture: farm RTK base for auto-steering tractors and field robots.
- Robotics: local correction source for outdoor robots, AMRs and robotic mowers.
Frequently asked questions
Can the HB62 be used as both a base station and a rover?
Yes. The web interface or a single USB configuration step sets the HB62 to BASE or ROVER mode. As a rover it gives 0.6 cm + 0.5 ppm horizontal RTK accuracy with corrections from a CORS network or another base.
How does the HB62 send RTK corrections to rovers?
It outputs RTCM v2.x, RTCM v3.x (MSM4–7) or CMR v2.0 over Ethernet with built-in NTRIP, or over its two RS232 ports to a radio modem. Rovers from most manufacturers accept RTCM v3 MSM.
Which antenna should I use with the HB62?
For a permanent reference site, use a multi-frequency geodetic or choke ring antenna on the TNC input. If you prefer a single-cable, all-in-one base, the HBEV11 RTK smart antenna combines a mosaic-G5 receiver and full-band antenna in one housing.
Can the HB62 work as a CORS-style reference station?
Yes. It is designed for continuous operation with stable power, IP67 sealing and 64 GB logging, and it streams corrections over NTRIP. Network integration and coordinate set-up depend on your caster and survey control; our team can help.
How do I get the full HB62 datasheet or a quote?
Email sales@gnss-solutions.com for the complete datasheet, or ask a quote with your application and quantity.
Related reading
HB62 specifications
| GNSS engine | Septentrio mosaic-X5, 448 hardware channels |
|---|---|
| Operating modes | RTK base station (reference) or RTK rover |
| GNSS signals | GPS L1C/A, L1P(Y), L2C, L2P, L5 · GLONASS L1C/A, L2C/A, L2P, L3 CDMA · Galileo E1, E5a, E5b, E5 AltBOC, E6 · BeiDou B1I, B1C, B2a, B2b, B2I, B3 · QZSS L1C/A, L1C/B, L2C, L5 · NavIC L5 · SBAS |
| RTK accuracy (RMS) | 0.6 cm + 0.5 ppm horizontal, 1 cm + 1 ppm vertical |
| RTK initialization | 7 s |
| Standalone / SBAS / DGNSS accuracy | H 1.2 m / 0.6 m / 0.4 m; V 1.9 m / 0.8 m / 0.7 m |
| Velocity accuracy | 3 cm/s |
| Maximum update rate | 100 Hz position and raw measurements |
| Data formats | RTCM v2.x, v3.x (MSM4/5/6/7) · CMR v2.0 (in/out), CMR+ (input) · NMEA 0183 v2.3, v3.03, v4.0 · Septentrio SBF (RINEX v2.x/v3.x by conversion) |
| Networking | Built-in web interface, NTRIP, Ethernet (on the LM12 connector) |
| Interfaces and storage | LM12 connector (power, 2 × RS232, Ethernet), USB 2.0, TNC antenna · 64 GB internal storage |
| Power | 9–36 V DC (12 V nominal), 1.5 W maximum |
| Environmental | IP67 · operating −40 °C to +85 °C · storage −55 °C to +85 °C |
| Dimensions / weight | 130 × 78 × 44 mm, 260 g |
| Certification | CE, RoHS, WEEE, UKCA |
| Complete datasheet | On request: sales@gnss-solutions.com |
Product datasheet
The complete datasheet (GNSS signals, interfaces, pin-out, electrical and environmental specifications) is available on request. Email sales@gnss-solutions.com with the product name and your application.
Support documentation
Ask a quote or contact our engineers for integration support.
