Home › Technology › Septentrio mosaic-X5
Technology

Septentrio mosaic-X5 Receivers by Eview

The Septentrio mosaic-X5 is a 448-channel multi-band GNSS module with centimetre RTK, 100 Hz output and AIM+ anti-jamming. Eview builds three receivers around it: the 45 g HB6 for drones and robots, the flange-mount HB56, and the rugged HB62 base station.

Updated October 2026.

Ask a quote See mosaic-X5 receivers
448
Channels
100 Hz
Position and measurements
<10 ms
Latency
~7 s
RTK initialisation
Key capabilities

What the mosaic-X5 brings to Eview receivers

All constellations, all bands
GPS, Galileo, GLONASS, BeiDou, QZSS and NavIC, including L5, E6 and SBAS, and L-band capable. See multi-constellation GNSS.
Centimetre RTK
RTK at 0.6 cm + 0.5 ppm horizontal and 1 cm + 1 ppm vertical, with about 7 s initialisation. See RTK GNSS.
100 Hz, <10 ms latency
Position and raw measurements up to 100 Hz with less than 10 ms latency, for control loops and INS fusion. See 100 Hz GNSS.
AIM+ anti-jamming
AIM+ (Premium tier) suppresses narrowband, wideband, chirp and pulsed interference, with real-time spectrum plots. See anti-jamming GNSS.
OSNMA anti-spoofing
Galileo OSNMA authenticates navigation data, layered with AIM+ signal-consistency checks. See OSNMA anti-spoofing.
Robust in hard conditions
IONO+ for scintillation, LOCK+ for vibration and shock, APME+ for multipath and RAIM+ for integrity monitoring. See IONO+ after sunset.
Specifications

Septentrio mosaic-X5 key specifications

Parametermosaic-X5
Channels448
GPSL1C/A, L1PY, L2C, L2P, L5
GalileoE1, E5a, E5b, E5 AltBOC, E6
GLONASSL1, L2, L3
BeiDouB1I, B1C, B2a, B2I, B2b, B3I
QZSS / NavIC / otherQZSS L1, L2C, L5; NavIC L5; SBAS; L-band capable
Update ratePosition and measurements up to 100 Hz
Latency<10 ms
RTK accuracy0.6 cm + 0.5 ppm H, 1 cm + 1 ppm V
RTK initialisationAbout 7 s
Module size and weight31 × 31 × 4 mm, 6.8 g
PowerAbout 0.6 W typical
Interfaces4 UART, USB, Ethernet, SD logging (SDIO)
Operating temperature−40 to +85 °C
ResilienceAIM+ (Premium tier), OSNMA, RAIM+, IONO+, LOCK+, APME+

Module figures from Septentrio. Eview receiver specifications (housing, connectors, supply voltage) are in each product datasheet.

Recommended products

Eview receivers built on the mosaic-X5

ProductBest forKey specs
HB6Drones, robots and compact roversSingle antenna, 100 Hz, 45 g, USB-C, microSD, 4.5–12 V
HB56Vehicles and machinesFlange-mount metal housing, SD logging, 100 Hz
HB62RTK base stationRugged, NTRIP, Ethernet, 64 GB logging, IP67, 9–36 V

All products are quote-based. For a complete datasheet, email sales@gnss-solutions.com. Need dual-antenna heading? See the mosaic-H receivers. Browse all box receivers.

Key facts

Septentrio mosaic-X5: key facts

The Septentrio mosaic-X5 is a compact multi-band, multi-constellation GNSS module with 448 channels, 100 Hz output and centimetre RTK. Eview builds it into the HB6, HB56 and HB62 receivers.

  • Signals: GPS, Galileo (incl. E6), GLONASS, BeiDou, QZSS, NavIC and SBAS
  • RTK accuracy: 0.6 cm + 0.5 ppm horizontal, 1 cm + 1 ppm vertical
  • Speed: up to 100 Hz, latency under 10 ms, RTK initialisation about 7 s
  • Resilience: AIM+, OSNMA, RAIM+, IONO+, LOCK+, APME+
  • Module: 31 x 31 x 4 mm, 6.8 g, about 0.6 W
  • Eview receivers: HB6 (drones, robots), HB56 (vehicles), HB62 (RTK base)
Use cases

Where mosaic-X5 receivers are used

Drones and UAVs
Light RTK rover with 100 Hz output for flight controllers. See UAV and drone RTK.
Survey and GIS
Full-band RTK rovers and HB62 base stations. See survey and GIS.
Robotics
Centimetre position for outdoor robots and AMRs. See robotics GNSS.
Precision agriculture
RTK for guidance and auto-steer retrofits. See precision agriculture.
Ports and logistics
RTK on straddle carriers and port vehicles. See mosaic-X5 on straddle carriers.
Deformation monitoring
Continuous RTK on structures with long-term logging. See deformation monitoring.
Integration

Integrating a mosaic-X5 receiver

ROS and robots
NMEA and SBF output with a ROS driver. See connect the mosaic-X5 to ROS.
Corrections and logging
RTCM v3 corrections in over NTRIP; raw SBF logging and RINEX conversion. See NTRIP, RTCM and RINEX.
Flight controllers and firmware
UART output for ArduPilot and PX4. Firmware and manuals on firmware downloads.
Use cases

Septentrio mosaic-X5 applications

The mosaic-X5 is the multi-band core of three Eview receivers. Here is where each one fits and which mosaic-X5 receiver to choose.

mosaic-X5 RTK receiver for drones
The HB6 is a 45 g mosaic-X5 receiver with 100 Hz output, USB-C and microSD logging, built for drones, robots and compact rovers running Pixhawk, ArduPilot or PX4.
mosaic-X5 receiver box for vehicles and machines
The HB56 is a mosaic-X5 receiver box in a flange-mount metal housing with SD logging and 100 Hz output, for vehicles, machines and survey rovers.
mosaic-X5 RTK base station
The HB62 is a rugged IP67 mosaic-X5 base with NTRIP, Ethernet and 64 GB logging, giving your own RTK corrections on site.
Robotics and ROS
A Septentrio mosaic-X5 receiver outputs NMEA and SBF over USB, UART or Ethernet, and the open-source ROS driver reads it directly.
Survey, GIS and PPK
Multi-band raw data from all constellations, including Galileo E6, supports RTK in the field and PPK or static processing back in the office.
Board-level integration
The module itself is 31 x 31 x 4 mm. For a board-level design inside your own product, see Eview OEM GNSS boards.

Related: RTK GNSS for drones, GNSS for robotics, survey grade GNSS receivers, Septentrio mosaic-G5 and our mosaic-X5 comparison. Further reading: Septentrio ROS and ROS 2 driver, Galileo High Accuracy Service (EUSPA). Email sales@gnss-solutions.com.

FAQ

Septentrio mosaic-X5: frequently asked questions

What is the Septentrio mosaic-X5?

It is a 31 × 31 × 4 mm multi-band GNSS module with 448 channels. It tracks GPS, Galileo, GLONASS, BeiDou, QZSS and NavIC, outputs position up to 100 Hz with less than 10 ms latency, and includes AIM+ anti-jamming and OSNMA. Eview uses it inside the HB6, HB56 and HB62 receivers.

What is the difference between mosaic-X5 and mosaic-G5?

The mosaic-X5 runs up to 100 Hz, tracks E6 and NavIC, and has 4 UART, USB and Ethernet. The mosaic-G5 has 789 channels, is quad-band, runs up to 20 Hz, is smaller at 22.8 × 16.4 × 2.4 mm and uses about 40% less power. Galileo HAS compatibility is a mosaic-G5 feature. See mosaic-X5 vs mosaic-G5 P3H.

Which Eview products use the mosaic-X5?

Three: the HB6, a 45 g single-antenna receiver with USB-C and microSD; the HB56, in a flange-mount metal housing with SD logging; and the HB62, a rugged IP67 base station with NTRIP, Ethernet and 64 GB logging. All three output up to 100 Hz.

Can it do RTK and PPK at the same time?

Yes. The receiver outputs a real-time RTK solution while it logs raw measurements in SBF to the SD card. You can convert the log to RINEX and post-process it as PPK, which gives a backup if the correction link drops. See RTK vs PPK.

How does the mosaic-X5 compare with the u-blox ZED-F9P?

mosaic-X5: 448 channels, position up to 100 Hz, RTK 0.6 cm + 0.5 ppm, 31 × 31 × 4 mm. ZED-F9P: 184 channels, RTK up to 20 Hz with GPS only and about 5-7 Hz with four constellations, RTK 0.01 m + 1 ppm, 17 × 22 × 2.4 mm. Figures from each manufacturer’s public datasheets. See mosaic-X5 vs ZED-F9P.

What frequency bands does the mosaic-X5 support?

GPS L1C/A, L1PY, L2C, L2P and L5; Galileo E1, E5a, E5b, E5 AltBOC and E6; GLONASS L1, L2 and L3; BeiDou B1I, B1C, B2a, B2I, B2b and B3I; QZSS L1, L2C and L5; NavIC L5; and SBAS. It is also L-band capable.

How do I connect a Septentrio mosaic-X5 to ROS?

Connect the receiver over USB, UART or Ethernet, install the open-source Septentrio ROS or ROS 2 driver, and set the receiver to output SBF or NMEA. The driver then publishes position, velocity and status topics for your navigation stack.

Related reading

Build with the mosaic-X5

Tell us your platform and interfaces, and we will recommend the HB6, HB56 or HB62 and a matching antenna.

Ask a quote